Abrasive Cup Wheel Bushings Manufacturer
For Type 6 - Straight Cup Wheel and Type 11 - Flaring Cup Wheel
|
|
|
| Cup Wheel Bushing | Tab Angle | Outside Diameter: Inch (Metric) |
Thread |
|---|---|---|---|
| 10 11 |
60 degrees 60 degrees |
1.750" (44.450mm) 2.625" (66.675mm) |
5/8"-11 UNC-2B 5/8"-11 UNC-2B |
| 13 14 |
86 degrees 86 degrees |
1.750" (44.450mm) 2.625" (66.675mm) |
5/8"-11 UNC-2B 5/8"-11 UNC-2B |
| 21 22 |
75 degrees 75 degrees |
1.750" (44.450mm) 2.625" (66.675mm) |
5/8"-11 UNC-2B 5/8"-11 UNC-2B |
Special High Speed
| Cup Wheel Bushing | Tab Angle | Outside Diameter: Inch (Metric) |
Thread |
|---|---|---|---|
| 10AT 10E14 10E16 11E14 |
60 degrees 60 degrees 60 degrees 60 degrees |
1.750" (44.450mm) 1.750" (44.450mm) 1.750" (44.450mm) 2.625" (66.675mm) |
5/8"-18 UNF-2B 7/8"-14 UNF-2B 3/4"-16 UNF-2B 7/8"-14 UNF-2B |
Other Available Nuts for All Cup Wheel (Spider) Bushings
| Nut | Height |
|---|---|
| 5/8"-11 UNC-2B Thread | |
| A A50 A70 A100 AT BSW70 8K (Knurl) 8K-215 LH (Left Hand) |
.740-.760” (18.796-19.304mm) |
| 3/4"-16 UNF-2B Thread | |
| E-16 | .740-.760” (18.796-19.304mm) |
| 7/8"-9 UNC-2B Thread | |
| E-75 E-87 E-100 |
.740-.760” (18.796-19.304mm) .865-.885” (21.971-22.479mm) .990-1.010” (25.146-25.654mm) |
| 7/8"-14 UNF-2B Thread | |
| E-14 | .740-.760” (18.796-19.304mm) |
| 1"-8 UNC-2B Thread | |
| E-8 HEX |
.740-.760” (18.796-19.304mm) .940-1.000” (23.876-25.400mm) |
| M12 x 1.75mm Thread | |
| M12 M12-50 |
.740-.760” (18.796-19.304mm) .453-473” (11.506-12.014mm) |
| M14 x 2.0mm Thread | |
| M14 M14-50 M14-70 |
.740-.760” (18.796-19.304mm) .453-473” (11.506-12.014mm) .688-.708” (17.475-17.983mm) |
| M16 x 1.5mm Thread | |
| M16-70 | .688-.708” (17.475-17.983mm) |
| M16 x 2.0mm Thread | |
| M16 M16-70 |
.740-.760” (18.796-19.304mm) .688-.708” (17.475-17.983mm) |
| M20 x 2.5mm Thread | |
| E-M20-2.5 E-M20-70 E-M20-70-LH E-M20-HEX-99 |
.740-.760” (18.796-19.304mm) .688-.708” (17.475-17.983mm) .688-.708” (17.475-17.983mm) .974-.994” (24.740-25.248mm) |
| No Thread | |
| E-MNO-30 (.295-.300” ream) E-MNO-70 (.295-.300” ream) |
.740-.760” (18.796-19.304mm) .688-.708” (17.475-17.983mm) |
Custom nuts available upon request.